Part 5 of 8. For vehicles with tapered bearing and seal installation hubs.
Lift up the front end of the vehicle using a car jack.
How to use a ball joint press.
Press out the ball joint.
Remove the front wheels.
Wipe out the bore clean with a lint free cloth.
Installing the new ball joint.
Press in the new ball joint.
Use a 320 grit emery cloth and clean out the bore where the ball joint was pressed into.
Wipe out the bore clean with a lint free cloth.
You will need to detach the tie rod end and the lower strut bolts.
Heres how to use a ball joint press.
They put together this training video on how to use a ball joint press to successfully swap out a worn ball joint.
Press out the ball joint.
How to install a control arm ball joint.
How to remove a ball joint using a jack stand and hammer.
The video shows a tech using otc tools 6529 ball joint master service kit for cars which is intended for professional mechanics and includes an adapter for dang near every car ever made.
How to use a ball joint press.
Use a 320 grit emery cloth and clean out the bore where the ball joint was pressed into.
Slide off the rotor.
How to change a ball joint.
Autozone ball joint tool.
It is when replacing ball joints that the use of a ball joint press comes in very handy.
Detach the brake caliper.
Canadian link for ball joint press httpsamznto2kjumuo ive used a balled joint press for doing bushings on both my jeep tj and my bmw it works great for all types of ball joints.
Grab a ball joint press kit and put the press onto the ball joint that is damaged or broken.
No comments:
Post a Comment