This will allow you to achieve perfect syrup. Instead of filling a tall cup or test tube with syrup and using a float style hydrometer prone to breaking due to the shock of submerging a glass instrument into very hot syrup this unit just takes a couple of drops of syrup.
Now that im making more syrup i bought a hydrometer to watch the syrup reach finishing.
How to use a hydrometer for maple syrup.
Carefully inspect the hydrometer for any breakage.
Hold the hydrometer cup over a pail or your boiling pan and slowly lower the hydrometer into the syrup.
It is way easier to use and more accurate in my opinion.
Unpack the hydrometer from its tube or box.
Alternatively when testing maple syrup you can simplify that whole process by using either a murphy compensation cup or murphy compensation float.
Place syrup sample in a sample cup at least 8 deep.
3 preparing a new hydrometer for use.
How to use a maple syrup hydrometer hot test 1.
If it leaks then it is damaged and cant be used.
Brick evaporator boils maple syrup.
Wear rubber gloves to protect hands.
If you suspect any cracks fill your test cup with hot water and immerse the hydrometer.
How to use a maple syrup hydrometer hot test for maple syrup syrup should be tested directly from the boiling pan.
The hydrometer and test cup can be.
It really is helpful when avoiding boil overs and the messy cleanup.
How to use a maple syrup or sap hydrometer how to use your syrup hydrometer.
To do all the compensation calculations for you.
Fill a warm testing cup at least 8 deep with hot boiling maple syrup.
How to use a hydrometer maple syrup how to test sap how to tell when syrup is done.
Slowly lower the clean hydrometer bulb side down all the way into the testing cup.
I watch the candy thermometer and when it.
The maple syrup will boil for a long time at 212of then it will start to climb.
It could crash into.
Do not let the syrup sit or cool.
Actually we at smoky lake never use a syrup hydrometer without a murphy compensation device.
Maple syrup hydrometer roth sugar bush cadott.
Here is my refractometer in use.
Fill the hydrometer test cup with syrup until it is approximately 1 to 2 inches from the top and place it on a level surface.
Do not fill the hydrometer cup with the hydrometer inside as the syrup on the stem will add weight and affect the reading.
Never drop the hydrometer into the testing cup.
Syrup hydrometer instructions 2014 page.
No comments:
Post a Comment