If you use the belt sander to sand metal youll create sparks which can start a fire if they mix with the sawdust in the machine and the dust bag. I still use low speed on delicate sanding operations like when im sanding a face frame flush to a plywood cabinet side.
Safety goggles belt sanders emit a lot of sawdust especially the old fashioned ones who dont have a dust bag attached to the machine.
How to use a belt sander safely.
Put on the necessary safety gear such as goggles or gloves.
Wear protective eye material and.
Safety tips to follow when using a belt sander use a dust collection system.
Secure the sanding belt in the direction shown on the belt and the machine.
You will then move your belt sander over the area you are working on.
When using the belt sander on wood it is very important that you sand with the grain of the wood and not cross grain as you will leave gouges on your wood surface if you do not.
When using a.
Its a good idea to choose a belt sander with a dust collection system.
Bring the rear of.
Remember the larger the number the finer the grit.
First start with a coarse grit belt something like a 60 grit belt will work well.
Before using a belt sander make sure that you are properly equipped with the following.
When you are finished working do not remove the sander from the wood until you have turned.
Start the motor of the belt sander while holding it away from the wood you intend to sand.
Variable speed provides great control.
Use two hands to operate sanders one on a trigger switch and the other on a front handle knob.
Make sure to protect your eyes from sawdust because a single dust that penetrates the eye can cause severe damage.
How to use a belt sander to remove paint.
Blow or vacuum the dust out of the sander before you use it on metal and remove the dust bag.
Sand with belt motion away from your body.
How to use a belt sander steps prepare your wood to be sanded by ensuring it is properly secured on the table or workbench.
Dont forget to wear impact resistant eyewear when using.
When youre first learning to use the sander you can run it with a fine paper at low speed so you cant take wood off too quickly.
Look for a machine with variable speed.
Important safety tips never change the sandpaper while the sander is plugged in.
Using your belt sander to remove paint varnish or stain is simple.
Keep hands away from a sanding belt.
It is also important to keep the sander moving all the time also to avoid gouging out deep spots if it stands in one position all the time.
Clean dust from the motor and vents at regular intervals.
Keep all cords clear of sanding area during use.
Place the tool onto the wood surface you are going to be working on before turning on.
No comments:
Post a Comment