Ron demonstrates how to get a quality cut from a hole saw. Loosen up the mounting plate until the nubs on the plate line up with the holes in the hole saw.
Finish the hole from the other side.
How to use a hole saw kit.
Align the center bit with the pilot hole on the opposite side of the door and complete the hole.
Ron demonstrates how to get a quality cut from a hole saw.
This video shows how to cut a 1 hole in some 6mm mild.
Insert the bit through the center hole.
Hole saws come in a variety of diameters and tooth sizes so choose the right one for the right job.
I show you what hole saws are how to use them and.
This lesson is a lesson time saver that will enable you to get good at diy and interiors.
Using a hole saw to cut holes through metal can be difficult and dangerous if you do not know how to use the drills safety features.
Protect yourself and your drill with this simple trick.
Using the hole saw cut just enough to score the surface of the wood.
Tighten the nut behind the mounting plate until the mandrel is secured to the hole saw.
Brace the drill against your hip for extra power and better control.
Learn how to operate a hole saw with videojugns best of the web informative video.
If you need to drill large holes perhaps an inch or larger hole saws are one of the good choices to pick.
5 inch 18 piece hole saw kit product review duration.
Then continue cutting with the hole saw.
Screw the mounting plate as tight as it goes.
The wood plug will stick in the saw and pop out the other side.
Next remove the saw and bore four or five inch diameter holes around the inside edge of the scored circle.
This is an overview of hole saws.
Push the mounting plate up and into the holes.
No comments:
Post a Comment