A chronograph watch typically has three dials to register the time elapsed a second dial also referred to as a sub second dial a minute dial and an. With the two pusher chronograph the top starts and stops the function while the pusher at 4 resets to zero.
Press the startstop button on the side of the watch.
How to use a chronograph watch.
Method 3 setting and stopping the chronograph.
Pull out or twist out the center dial on the left side of your watch face.
It should fit your wrist comfortably and properly.
Stop the chronograph by pushing that button again.
Method 2 reading the sub dials.
Astronauts during americas golden age of space exploration strapped watches with chronographs on their wrists too.
Twist the dial to move the hour minute and second hands until your watch reflects the proper time.
Pick a chronograph watch that is easy to read.
How to use a chronograph watch the chronograph is most recognizable by the addition of two pushers at 2 oclock and 4 oclock on the case.
How to use a chronograph chronograph is just a fancy word for stopwatch they were added to watches back in the early part of the 20th century to allow racecar drivers and pilots to time themselves and each other.
It should have luminous markings that are readable.
Use the chronograph to time a wide variety of things from coffee brew time to how to long it takes to get to work to the length of a phone call to a 100 yard dash.
You should feel it settle into an extended position.
Start the chronograph by pressing the button at 2 oclock.
Reset the chronograph by pushing the button at 4 oclock.
Three sub registers on zenith vs.
Push dial in or twist to secure and resume watch function at the proper time.
It should be capable of recording more time than your intended duration.
Watch the second hand while you time things.
Now for some important tips on how to get the ideal chronograph watch.
How to use a chronograph watch method 1 choosing a watch.
Choose a watch thats simple and easy to read.
No comments:
Post a Comment