Square angle tool. About 1 meter wooden board.
This particular miter box comes with little peg clamps to hold the board tight against the back of the box.
How to use a miter box to make a frame.
Place your wood or trim in the miter box using any clamps or hold downs to secure the piece to the box.
I apologize in advance for the color issues with my camera.
A miter box could hardly be simpler consisting as it does of only three pieces front back and bottom.
Make sure to correctly orient the wood toward the angle of cut noting whether you want the cut across the face of the wood a bevel or across the height of the wood a miter.
Even if youve got power tools youll want to add a miter box to your diy toolkit.
You can think of it as being like training wheels on a bicycle.
Place the wood in the miter box lay the wood inside the miter box either flat or standing on end depending on the cut to be made.
Youll need a speed square or any tool that measures 45 degrees to mark the side of your wood pieces.
Follow on instagram.
Instead you can build your own miter box using some 1 x 3 scrap wood and your own saw and since its custom made it will be more accurate than anything else.
How to make diy picture frames using a miter box.
Here are the simple steps for making your own picture frames.
The miters are cut using a dovetail saw then fine tuned into a perfect 45 degree angle on the shooting board.
However in the combination that i tested the saw was of poor quality.
A miter box helps you to make straight correctly angled cuts.
Buying one separately costs extra but is worthwhile.
In your local retailer you may see a miter box and a tenon saw sold in one package.
Line up the waste side of the cut line with the side of the slot not right down the middle.
Step 1 set up your miter box.
Cut wooden board into three equal length boards and connect the boards together using nails or bolts.
Nails or bolts.
No comments:
Post a Comment