The red lead goes into the va socket and the black lead goes into com the ground socket. Connect the probes to the proper inputs.
Carefully insert the red probe into the right slot of the outlet.
How to use a multimeter to measure voltage outlet.
Using a digital multimeter to check for voltage on a typical 220 240 vac dryer plug receptical.
Connect the test leads to the multimeter via their color coded slots.
Set a multimeter to measure voltage.
Com for the black lead and volts for the red lead.
240 volts should be sufficient for any household need.
Note the maximum voltage for each setting household current is approximately 120 volts set the dial accordingly.
Then locate the dial on the front of the multimeter and turn it to the ac setting.
A properly working outlet gives a reading of 110 to 120 volts.
If there is no reading check the wiring and the outlet.
Caution 220 240 vac kills if unfamiliar with electrical safety seek professional assistance.
Find the power switch on your multimeter and switch it on.
2 grab your multimeter and set it to measure voltage ac or vac.
How to measure voltage.
Set the dial to ac voltage or vac.
Checking out voltage on an ac wall outlet using a digital multi meter.
According to circuit specialists you should note the maximum voltage for each setting.
If unfamiliar with electrical safety procedures or equipment.
Switch on the multimeter and turn the dial to the ac setting.
According to circuit specialists you should note the maximum voltage for each setting.
Step 3 turn on the multimeter and set the measurement dial to the ac voltage range you want to measure.
Ac stands for alternating current and this setting measures the volts that an outlet is putting out.
Insert a probe into each slot and read the line voltage measurement.
No comments:
Post a Comment